User Manual:
Autophix.com/support-en?productName=7360
AI Overview
Autophix 7360 Automotive OBD2 Scanner All System Diagnostic ...The Autophix 7360 is a specialized diagnostic scanner for Toyota, Lexus, and Scion vehicles (1996–2021+) with a 16-pin OBDII port, offering full-system diagnostics and specialized maintenance resets. It covers powertrain, suspension, body, and electrical modules, including ABS, SRS (Airbag), SAS, TPMS, and oil resets.
Key Diagnostic Capabilities:
Full System Scan: Access Engine, ABS, Airbag, Transmission, TPMS, Steering Angle, and Parking Brake systems.
Special Functions: Includes Oil Reset, EPB Reset, Battery Management System (BMS) reset/registration, Throttle Learning, SAS Calibration, ABS Bleeding, and DPF Regeneration.
OBDII Engine Functions: Works as a universal tool to read/clear engine codes and check I/M readiness on non-Toyota vehicles (basic OBD2 only).
Compatibility Notes:
Requires a 12V 16-pin OBDII interface.
Functions may vary by model and year; not all systems are supported on every vehicle.
The scanner is Updatable on the Autophix website.
TPMS Tire Pressure Relearn Tool [included as a bonus]
EL-50448
OEC-T5
User Manual:
m.media-amazon.com/images/I/81jYyHo2NxL.pdf
Vehicle Compatibility:
ebay.com/itm/156036839423
AI Overview
Shenzhen Xinhongwei Technology EL-50448 PLUS Tire Pressure ...The EL-50448 TPMS relearn tool is used to reset Tire Pressure Monitoring Systems on GM/Ford vehicles (315/433 MHz) after tire rotations or sensor replacements. It requires a 9V battery and involves setting the car to learning mode, then activating each sensor in order (LF, RF, RR, LR) with the tool against the sidewall.
EL-50448 Operation Steps (GM Focus):
Step 1: Enter Learning Mode: Ensure the vehicle is in Park (P). Use the dashboard menu/driver information center to initiate "Relearn Tire Positions" or "TPMS Learn". The horn will chirp once, indicating the system is in learning mode, and the driver display will likely indicate the Front Left (LF) tire.
Step 2: Activate Sensors: Start with the front left (driver's side) tire. Place the antenna of the EL-50448 tool against the sidewall near the valve stem.
Step 3: Trigger Sensor: Press the button on the tool. The light will blink, and the horn will honk to confirm the sensor has been read.
Step 4: Repeat: Follow this order: Front Left, Front Right, Rear Right, Rear Left.
Step 5: Complete: After the rear left sensor is read, the horn will beep twice (double horn honk) to signify the process is finished and the IDs are stored.
Key Considerations:
Order: The sequence is crucial: Front Left -> Front Right -> Rear Right -> Rear Left.
Positioning: Hold the tool tip right against the tire sidewall near the valve stem, not directly on the metal rim.
Failures: If it fails, ensure the 9V battery is new and other sensors are at least away to prevent interference.
Compatibility: This tool is designed primarily for GM (Chevy, Buick, GMC, Cadillac) and some Ford vehicles.s
===
TERMS: As Is, No Warranty, No Returns, Cash.
Local Pick Up